扫一扫
滑模机产品案例遍布全国各地，多年来凭着“诚实守信”的经营作风和“顾客的需求就是我们的愿望”的营销理念以及“质优价惠”赢得了客户的好评。豫信致诚机械设备有限公司可以根据不同用户的需求进行设计生产。 滑模机产品质量保证，价格从优，欢迎您的惠顾！
软管泵属于蠕动泵的范畴，主要是由一根特制的橡胶软管，对应泵体内转子总成上的一对压辊，当压辊沿着橡胶软管转动时，压辊与泵壳产生的挤压力将橡胶软管压扁，在软管自身弹性和侧导辊的强制下，通过恢复原状产生的真空吸入流体物料，物料在压辊的机械挤压下从管内排出，如此往复循环，从而达到连续输出物料的目的。
The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.
工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
技术支持：059t.com
